Call us today
R454b Chillers
Key attributes of the new IPE range.
Axial fans either EC or AC
High efficiency fans allowing starting at very low temperature and high energy performance. Depending on outlet temperatures of fluid to the evaporator, the EC fans become mandatory for compliance with EC Law.
Structure
Structure specially designed for withstand the most hostile environments. The internal layout has been optimized to facilitate lifting operations and group maintenance
Hydronic kit
Integrated hydronic kit comprising a water tank available for a temperature stability, a pump with a suitable pressure (1.5 bar to 5 bar) in depending on the process, and the safety pressure level.
Scroll Compressors
Optimization of energy efficiency thanks to scroll compressors with high energy efficiency that allows consumption optimised and adapted to user needs
Electric Cabinet
IP54 type insulated electrical cabinet produced according to IEC 204 standards - 1/EN60204 -1 with all elements of necessary protection
Gas detector
The Atex gas detector checks continuously the concentration of R454B against the Lower flammability limit and ensures safe operation of the system.
Advanced Control
Optimized and developed controls according to CTA standards to allow optimum control of the unit throughout all operation steps
Atex fan
Certified Atex fan that ensures the chassis ventilation operations case of propagation of the refrigerant (in option)
Axial fans either EC or AC
High efficiency fans allowing starting at very low temperature and high energy performance. Depending on outlet temperatures of fluid to the evaporator, the EC fans become mandatory for compliance with EC Law.
Structure
Structure specially designed for withstand the most hostile environments. The internal layout has been optimized to facilitate lifting operations and group maintenance
Hydronic kit
Integrated hydronic kit comprising a water tank available for a temperature stability, a pump with a suitable pressure (1.5 bar to 5 bar) in depending on the process, and the safety pressure level.
Scroll Compressors
Optimization of energy efficiency thanks to scroll compressors with high energy efficiency that allows consumption optimised and adapted to user needs
Electric Cabinet
IP54 type insulated electrical cabinet produced according to IEC 204 standards - 1/EN60204 -1 with all elements of necessary protection
Gas detector
The Atex gas detector checks continuously the concentration of R454B against the Lower flammability limit and ensures safe operation of the system.
Advanced Control
Optimized and developed controls according to CTA standards to allow optimum control of the unit throughout all operation steps
Atex fan
Certified Atex fan that ensures the chassis ventilation operations case of propagation of the refrigerant (in option)
Additional options available
Total Heat Recovery
Total heat recovery, available as an option, restores 100% of the calories absorbed on the evaporator and electrical energy absorbed by the compressor. In this sense, it ensures the simultaneous production of hot and cold water
Desuperheater
The IPE New Gen range is optionally equipped with a desuperheater allowing heat recovery from the compressors to be able to simultaneously produce hot and cold water. This option allows the use of calories "free" of the compressor, up to 25% of the total cooling capacity to supply the process with hot water.
Speed variation on electric motors
Speed variation on all electric motors is available. It is carried out through a slave VFD for the compressor and a master VFD for the pumps. The variable frequency drive improves the performance of the unit thanks to a permanent and stable maintenance of the setpoint temperatures as well as a wide operating range responding to the variability of the thermal load on the process. The frequency converter also allows a current of reduced start-up and thus ensures many savings in use but also in installation
Floating HP/LP
Floating HP / LP The units of the IPE New Gen R454b series are optionally equipped with devices allowing the implementation of high and low floating pressures in order to improve the energy yields of the unit.
Total Heat Recovery
Total heat recovery, available as an option, restores 100% of the calories absorbed on the evaporator and electrical energy absorbed by the compressor. In this sense, it ensures the simultaneous production of hot and cold water
Desuperheater
The IPE New Gen range is optionally equipped with a desuperheater allowing heat recovery from the compressors to be able to simultaneously produce hot and cold water. This option allows the use of calories "free" of the compressor, up to 25% of the total cooling capacity to supply the process with hot water.
Speed variation on electric motors
Speed variation on all electric motors is available. It is carried out through a slave VFD for the compressor and a master VFD for the pumps. The variable frequency drive improves the performance of the unit thanks to a permanent and stable maintenance of the setpoint temperatures as well as a wide operating range responding to the variability of the thermal load on the process. The frequency converter also allows a current of reduced start-up and thus ensures many savings in use but also in installation
Floating HP/LP
Floating HP / LP The units of the IPE New Gen R454b series are optionally equipped with devices allowing the implementation of high and low floating pressures in order to improve the energy yields of the unit.